Reverse engineering vehicle data guides

Find the data you need in a vehicle without its documentation: standard OBD-II PIDs, manufacturer data behind UDS identifiers, broadcast CAN signals, and the counters and CRCs that protect them. Every guide includes code you can run.

11 guides Read them in this order

  1. How to reverse engineer vehicle data: CAN, LIN, Ethernet and OBD-II Where the data you want lives in a vehicle, which method finds it, and which tools to use on each bus. A map of CAN, CAN FD, LIN, FlexRay, Automotive Ethernet, OBD-II and UDS for reverse engineering, with links to step-by-step guides. 9 min read Beginner Guide
  2. OBD-II port pinout, buses and secure gateways: what you can reach Which pins of the OBD-II connector carry CAN, K-line, J1850 and DoIP Ethernet, why many cars show no traffic on the port, how secure gateways limit aftermarket tools, and how to tell a live bus from a filtered diagnostic port. With a tested Python check. 9 min read Beginner Guide
  3. OBD-II PIDs explained: supported-PID bitmaps, formulas, trouble codes and VIN How to find out which OBD-II PIDs a car supports, decode the common ones, read trouble codes with service 03 and the VIN with service 09. Real frame layouts, a formula table and a tested Python scanner. 12 min read Beginner Tutorial
  4. Finding OEM data with UDS: how to scan DIDs with service 0x22 How to find manufacturer-specific data in an ECU when you have no documentation. Find the ECUs, scan data identifiers with ReadDataByIdentifier, read the negative responses, and work out what the bytes mean. Includes a tested Python scanner. 13 min read Intermediate Tutorial
  5. Which ECU sends which CAN ID? Five ways to map a CAN bus How to find out which ECU transmits each CAN message when you have no DBC: disconnecting ECUs, start-up order, diagnostic identification, and fingerprinting senders by their clock drift. With a tested Python script that groups CAN IDs by sender. 10 min read Intermediate Guide
  6. How to find counters, checksums and CRCs in CAN frames Identify alive counters, simple checksums and CRC-8 bytes in CAN messages from a log alone. Covers sum, XOR and nibble checksums, CRC-8 SAE J1850 and CRC-8H2F, hidden Data IDs as used by AUTOSAR E2E, and a tested Python search. 13 min read Advanced Tutorial
  7. Reverse engineering J1939 proprietary messages (PGN 0xEF00 and 0xFF00–0xFFFF) How to find and decode manufacturer-specific J1939 data on trucks, buses and off-highway machines. Proprietary A and B PGNs, grouping by source address, transport protocol, and using standard PGNs such as EEC1 engine speed as a built-in reference. With tested Python code. 10 min read Intermediate Guide
  8. Reverse engineering LIN bus traffic and building an LDF How to sniff a LIN bus safely, check protected IDs and checksums, tell classic from enhanced checksums, recover the schedule and frame lengths, and write a starting LDF. With tested Python code and an LDF that parses in ldfparser. 11 min read Intermediate Tutorial
  9. Reverse engineering automotive Ethernet: from capture to SOME/IP signals How to tap into an automotive Ethernet link, list every SOME/IP service from service discovery, and find signals in SOME/IP payloads without ARXML. Includes a standard-library Python pcap reader, a service lister and a payload survey, tested on a generated capture. 12 min read Advanced Tutorial
  10. Automated CAN reverse engineering: what the research shows A practical review of published methods that recover CAN signals automatically, from bit-flip statistics (READ, TANG) to complete DBC pipelines (CAN-D), reference matching (LibreCAN), frame reuse (CANMatch), byte-level clustering (ByCAN) and LLM agents, with what each one contributes and how to use the ideas. 11 min read Intermediate Guide
  11. Reverse engineering CAN signals with AI: a pipeline you can test How automated CAN reverse engineering works, from bit-flip statistics to correlation with an OBD-II reference, and where an LLM agent fits. Includes a standard-library Python pipeline, a synthetic log with a known DBC, and measured results. 15 min read Advanced Tutorial

Other topics